loading procedure造句
例句与造句
- All loading procedures refer to manufacture instruction
各站装载程序详见说明书。 - The detection methods , load procedure and selecting the sample of material , etc . all be done by the request of the " test on the building structure " strictly
本试验的检测方法、加载程序以及试件材料的取样等工作都严格按照《建筑结构试验》 2的要求进行。 - An inner iterative incremental displcacement procedure on the basis of the harmonization of the deformation amid the displacement function , and an inner iterative incremental load procedure cmi the basis of tile dispacement function and the improved arc - length method are proposed
本文提出了基于变形协调与位移模式的内迭代位移增量法与基于位移模式和改进弧长法的内迭代荷载增量法。 - 3 ) the average - strain of cross - section still can be assumed to be keep - in - plane within the whole loading procedure ; the theoretical moment - curvatures obtained by the cross - section keep - in - plane is consistent with the experimental ones . 4 ) the analytical flexural bearing capacity and cfrp - strain are more accurate by assuming the concrete ultimate strain to be 0 . 07 instead of 0 . 0033 ; 5 ) limiting the cfrp - strain under 0 . 01 is reasonable to evaluate the flexural bearing capacity of rc beams retrofitted with cfrp ; 6 ) the initial load is hardly influence the flexural bearing capacity of cfrp - strengthened rc beams
取混凝土的极限压应变0 . 007代替0 . 0033进行计算的结果能更准确地评浙江大学硕士学位论文2004摘要价加固梁的抗弯承载力和cfrp应变; 5 .在计算cfrp加固梁的抗弯承载力时，限制cfrp的应变在0 . 01以内的措施是恰当的; 6 .梁所承受的荷载的大小对加固后梁的抗弯承载力影响不大。 - In order to investigate the effects of cfrp sheets on flexural bearing capacity and stiffness of the beam , test of 18 rc beams retrofitted with cfrp sheets was carried out . 16 beams were retrofitted while they were bearing loads and there were bending cracks on their surfaces . the parameters of the test include the ratio of the rebar , quantities of cfrp and loading procedure
本文拟通过16根加固梁和两根对比梁模拟实际构件的加固及受力过程，对持续荷载作用下cfrp加固钢筋混凝土梁进行抗弯试验，目的就是为了研究外贴cfrp对梁的承载力和抗弯刚度的影响，为评价服役结构构件的承载力和挠度打下基础。 - It's difficult to find loading procedure in a sentence. 用loading procedure造句挺难的